ADS Environmental Services Profile Software 950015B6 - Manual (Page 249)

Quantity Coefficient Generator 4-27
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Store Data dialog
2. Enter the date and time of the first data point to which you want
to begin applying the coefficient values in the Start Time field.
3. Select the Avg or Bestfit radio button from the Hydraulic
Coefficient section to indicate which hydraulic coefficient you
want to save.
4. Select the Avg or Bestfit radio button from the
Roughness/Slope section to indicate which Roughness and
Slope values you want to save.
5. Select the OK button to save the coefficients to the database.
Profile automatically regenerates all dependent data.
Storing Manually Entered Coefficients
Select a specific Edit command to manually enter HC,
Roughness/Slope, Silt, or Offset and Gain values to the database.
A dialog will display to allow you to enter and store the
coefficient(s). You also can use the Edit command to replace,
delete, or print coefficient entries.