ADS Environmental Services Profile Software 950015B6 - Manual (Page 113)

Profile Main Screen 2-73
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Temperature tab 
Temperature parameters for Peak Combo 1 (or 2)
• Sensor Select the source from which to measure the
temperature used when compensating for temperature in Peak
Combo Sensor readings. The channels correspond to the
sensors connected to those channels (ports) on the monitor.
The option selected here should be consistent with the option
selected for the Channel in the Device Parameters section at
the bottom of the dialog.
Note: The stored temperature value is the actual water
temperature reading from the Peak Combo Sensor.
• Store Data Select this checkbox to ensure the monitor logs
the temperature data to memory. This option is selected by
default.