ADS Environmental Services Profile Software 950015B6 - Manual (Page 88)

2-48 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 – 2012 ADS LLC. All Rights Reserved.
Edit MLI Device Properties (FlowShark)
• Alarm Notification Enter the communication parameters
required to enable the monitor to contact an ADS IntelliServe
system under alarm conditions.
 Enable Select this checkbox to ensure Profile configures
the monitor with the alarm notification communication
information.
 Phone Number or TCP/IP Address Enter the
telephone number or the IP address (for wireless
communication) for the IntelliServe system you want the
monitor to contact when a designated alarm condition
occurs.
Note: The number/address field displays IP Address
when the monitor location is configured for wireless
(TCP/IP) communications.