ADS Environmental Services Profile Software 950015B6 - Manual (Page 281)

6-10 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
The Logs section displays all logs available for the selected location
and log type.
5. Select the specific log you want to view, and select the View
button.
The View Logs dialog displays the logs available for viewing
corresponding to the selected log type.
Print
button
6. (optional) Select the Print button to print the log file contents.
Viewing Group Diagnostic Logs
See Chapter 2 - Profile Main Screen for information on viewing
diagnostic activity logs for monitor groups.
Reviewing Waveforms
Note: See View Sensor Waveforms page 6-42 for more
information on capturing waveforms.
Profile enables you to capture ultrasonic and velocity waveforms for
some monitor series in order to review the signals returned after firing
the sensors. The monitor interprets and converts these signals to
produce sensor readings. Review previously captured graphical
waveforms using the Waveform function.
Review historical ultrasonic and velocity waveforms in the following
way:
1. Select Waveforms from the Functions drop-down list, and then
select the Perform button.
The View Sensor Waveforms dialog displays. The Waveforms list
box contains all historical ultrasonic and velocity
waveforms.