ADS Environmental Services Profile Software 950015B6 User Manual
Page 319
6-48
Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Diagnostics dialog for the Ultrasonic 1 device following sensor firing
You also can edit the configuration information in the dialog at
any time. Refer to Selecting and Editing Devices in Chapter 2, for
descriptions of the individual configuration parameters
corresponding to each device. Save these modifications to the LIF
in the monitor in the following way:
Make changes to the configuration information as necessary.
Select the Store button to save the changes to the database.
Select the Close button.
Select Activate from the Functions drop-down list, and then
select the Perform button.
Note: If you are running diagnostics on multiple devices for
the same monitor, you may delay activating the monitor until
you have finished running diagnostics on all the selected
devices. However, you must save the changes to the database
before exiting each device window.