ADS Environmental Services Profile Software 950015B6 - Manual (Page 131)

Profile Main Screen 2-91
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Device (FlowShark) on page 2-47 for more information on
setting this threshold.
Rain Gauge Device (RainAlert II)
Edit the rain gauge device for a RainAlert II monitor in the
following way. For instructions on modifying the rain gauge
device parameters for FlowShark and other monitors with this
device, refer to Rain Gauge Device on page 2-89 or Rain Gauge
Device (FlowShark) on page 2-90.
Edit Rain Parameters (RainAlert II)
• Rain Per Tip Enter the amount of rainfall that must
accumulate in the tipping bucket to initiate one tip of the
tipping mechanism.
• Rain Intensity Interval Enter the amount of time in
minutes within which a specified amount of rain (Threshold)
must fall to initiate a rain alarm.
• Log UK Intensity Select this checkbox to log the amount of
rainfall that occurs over a specified time period based on the
United Kingdom’s rain intensity standards. (The monitor must
be activated with a 2-minute Normal sample interval.)
• Enable Select this checkbox to activate the options
corresponding to the Rain Alarm section and configure the
RainAlert II monitor to cryout rain alarms to an IntelliServe
system and up to three of any combination of text-message
capable cell phones or email addresses (see the Notification
device) based on the parameters defined in this section.