ADS Environmental Services Profile Software 950015B6 - Manual (Page 516)

15-8 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Overflow from the dialog. QFinal flows from Upstream
monitoring points will be added to a flow composite. A "+"
symbol next to the monitoring point in the Selected list
indicates an Upstream monitoring point. QFinal flows from
Overflow monitoring points will be subtracted from a flow
composite. A "–" symbol next to the monitoring point in the
Selected list indicates an Overflow monitoring point.
3. Select OK to close and exit the dialog.
Setting Up the Balance Report
Setting up the balance report includes selecting the report attributes.
Set up the balance report by selecting from the following reporting
options:
Selecting the Report Type
Graphical
button
Tabular
button
Select a report type for the balance report. Select the Graphical or
Tabular toolbar buttons to display the balance report in either a
hydrograph format or a tabular format.
Adjusting Graph Scales Manually or Automatically
Note: This applies to the flow scales on graphical
balance reports only.
Autoscale
button
Automatically adjust the flow scales for a Graphical balance report
using the Autoscale option or toolbar button. Autoscale
automatically sets the graph scales based on the highest and lowest
flow quantities during the reported period.
Manually set the graph scales by de-selecting the Autoscale toolbar
button and manually incrementing the Minimum Y and Maximum
Y fields (located below the toolbar) to the desired values.