ADS Environmental Services Profile Software 950015B6 - Manual (Page 75)

Profile Main Screen 2-35
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
• Debounce Enter or use the arrows to set the amount of
time (in seconds), following a change in state, the float
device must remain in a new state to activate an alarm or
indicate a return to normal. ADS recommends maintaining
the default setting for this parameter.
• Trip Point Enter the elevation at which the float will
change states. This value typically represents the distance
from the manhole invert to the midsection of the float
when hanging freely in the manhole.
Flow Device
Profile supports three flow device entities: QContinuity, QPSFill,
and QPSRun. QContinuity is available for monitors with depth and
velocity devices; however, QPSFill and QPSRun are available only
with pump station monitors.
Note: Only ADS pump station monitors can generate
QPSFill and QPSRun from the Flow device. Therefore,
most ADS monitors generate only the QContinuity entity
from the Flow device.
Edit the flow device in the following way:
Edit Flow Device Properties
Note: The options available for Flow Type, Depth Type,
and Velocity Type correspond to the devices assigned to
the monitoring point.