ADS Environmental Services Profile Software 950015B6 User Manual
Page 270
5-12
Profile
Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 - 2012 ADS LLC. All Rights Reserved.
Note: Previously collected and edited data could
potentially be overwritten by using this option.
1. From the Profile main screen, select the monitor location from
which you want to collect a specific time span of data.
Properties
button
2. Select the Edit > Properties option or the Properties toolbar
button to display the Properties for location dialog.
3. From the Autocollect section, remove the check from the
Autocollect checkbox, if necessary.
4. From the Manual Collection section of the dialog, enter the
appropriate Start Time and End Time corresponding to the time
span of data you want to collect.
5. Select OK to close and exit the dialog.
6. Perform the steps to Collecting Monitor Data to collect the data.
After the partial collect is completed, the monitor configuration
automatically returns to the Autocollect status based on the last
data point in the database.