ADS Environmental Services Profile Software 950015B6 - Manual (Page 62)

2-22 Profile Software User's Guide
CONFIDENTIAL – Covered by ADS Software License Agreement
1998 – 2012 ADS LLC. All Rights Reserved.
Time and End Time fields under Manual Collection and
implement this option.
Note: The start and end times displayed in the Monitor
Data section represent the complete date/time range of
flow data available in the monitor memory.
11. Enter or use the arrow buttons to designate the number of hours
difference between your location (i.e., the location of the
computer on which the database resides) and the physical
location of the monitor in the Time Zone field. For example, if
you are in the Central time zone and the monitor is located in
the Eastern time zone, enter 1 in this field. However, if you are
in the Central time zone and the monitor is located in the
Pacific time zone, enter -2 in this field.
12. Enter the vertical distance from the manhole rim to the bottom
of the manhole invert in the Manhole Depth field. Profile
provides the option to include this information on hydrograph
data reports.
13. Choose the rates at which you want the monitor to take
readings and/or log data from the corresponding drop-down
lists:
 Normal Select the standard rate at which you want the
monitor to log data from this drop-down list.
Note: The Fast and Scan drop-down lists apply only
when implementing the Dual Data Rate feature in MLI.
The Scan rate also pertains to applications involving
Modbus and Telog
® Ru-33 operations.
 Fast Select the accelerated interval at which you want the
monitor to log data once the threshold defined in MLI has
been exceeded from this drop-down list. The monitor will
remain in this state until the flow conditions at the
monitoring point return to normal, as defined by MLI.
 Scan Select the rate at which you want the monitor to
evaluate flow conditions to verify whether an event
threshold has been exceeded from the drop-down list.