Baby Lock Palette 10 (ECS10) Instruction Manual - Manual (Page 120)

119
Advanced Operations for Entering Text
The settings for all small text attributes except the
font are specified in the same way that they are
specified for regular text patterns.
However, with small text, settings cannot be
specified for the following.
• Sew type
• Sewing Attributes
• Transform
• Name Drop
■ When sewing small fonts
For best results when using your embroidery
machine to embroider patterns containing small font
patterns, follow the recommendations described
below.
1
Reduce the thread tension to less than what is
used when embroidering normal designs.
2
Sew at a speed slower than what is used when
embroidering normal designs.
(For details on adjusting the thread tension
and sewing speed, refer to the Operation
Manual provided with your embroidery
machine.)
3
Do not trim the jump stitches between the
characters.
(For details on setting the machine for thread
trimming, refer to the Operation Manual for the
embroidery machine.)
a
Only built-in fonts specifically for small text can be
used.
cc
For a list of the built-in fonts specifically for
small text, refer to "Small Text" on page 342.
b
To edit an entered small text, select the small text
with the [Select] tool, and then type the new text
into the text field in the [Text Attributes]
pane.There are three other ways to edit text.
cc "Editing entered text" on page 107