Baby Lock Palette 10 (ECS10) Instruction Manual - Manual (Page 124)

123
Advanced Operations for Entering Monograms
Advanced Operations for Entering
Monograms
Monogram attributes can be selected from the
[Text] tab, the [Text Attributes] pane, the [Sewing
Attributes] pane and the [Color] pane. When the
Monogram tool is selected, the [Text] tab appears
as shown below.
■ Monogram font
Click the [Font] selector, and then select the
desired font.
a
Font Type
• A number identifies built-in fonts.
• identifies Monogram fonts.
b
Font sample
If a single string of text is selected, the
fonts in the list appear with the selected
characters.
c
Font name
d
Most recently used fonts
The settings for all monogram attributes except the
font are specified in the same way that they are
specified for regular text patterns.
However, with monograms, settings cannot be
specified for the following.
• Rotate Angle, Character Spacing, Line Spacing,
Alignment, Direction
• Transform
• Name Drop
• Fit Text to Outline
Editing monograms
b
The [Text] tab appears when a monogram or the
Monogram tool is selected.
a b c
d
b
Diamond and Script are fonts exclusively for
monograms. You can also use built-in fonts, user-
defined fonts and TrueType fonts.
cc
For a list of the built-in fonts and monogram
fonts, refer to "Font List" on page 340.
b
• To edit an entered monogram, select the text
pattern with the [Select] tool, and then type the
new text into the text field in the [Text
Attributes] pane.
• There are three other ways to edit text.
cc
"Editing entered text" on page 107