Baby Lock Palette 10 (ECS10) Instruction Manual - Manual (Page 220)

219
Basic Design Center Operations
a
Sewing attributes for region cannot be applied to
open regions (regions not fully enclosed in an
outline), as shown in the illustration below.
If attributes cannot be applied to a region, return to
the Figure Handle Stage and make sure that
region is closed. Edit any broken lines with the Edit
Point tool.
cc
"Adding lines to the figure handle image" on
page 215
b
• From the [Sewing Attribute Setting] dialog
box, detailed settings for attributes, such as the
width of satin stitches and the run pitch, can be
specified.
cc
"Specifying sewing attributes" on page 233.
• The Reference Window is useful for specifying
colors while checking the colors of the original
image.
Using the Reference Window
This allows you to select colors while checking
the colors in the original image.
1. Click the [View] tab.
2. Select the [Reference Window] check box
in the [Show/Hide] group.
3. Click the [Image] tab.
 The image opened in Original Image
stage appears.
If [Reference] has been clicked, click
[Original].