Baby Lock Palette 10 (ECS10) Instruction Manual - Manual (Page 54)

53
Specifying Thread Colors and Sew Types for Lines and Regions
■ Reversing the sewing direction
1
Select the Select Point tool.
2
Click a shape pattern.
3
Click the [Shapes] tab.
4
Click [Reverse Direction Line] in the
[Sewing Direction Line] group.
If there are multiple sewing direction lines, all
lines will be reversed.
■ Deleting sewing direction lines
1
Select the Select Point tool.
2
Click a shape pattern, and then click an empty
square or empty triangle on the sewing
direction line to select the point.
3
Click the [Shapes] tab.
4
Click [Delete Direction Line] in the [Sewing
Direction Line] group, and then click [Delete
Selected Line] or [Delete Lines Not
Selected].
Delete Selected Line
Click this command to delete the selected
sewing direction line. Otherwise, press the
<Delete> key to delete the sewing direction.
Delete Lines Not Selected
Click this command to delete all sewing
direction lines except the currently selected
one. The sewing direction will become
uniform.
b
The sewing angle can also be set to a specific
direction (one sewing direction line) with the
settings under [Direction] in the [Sewing
Attributes] pane.
cc
"Specifying sewing attributes" on page 54