Baby Lock Palette 10 (ECS10) Instruction Manual - Manual (Page 164)

163
Tutorial 8-1: Creating Appliqués
6
Specify the stitching for securing the appliqué
in [Covering Stitch]. Select the sew type and
other attributes ([Width] and [Density]) for
finishing the appliqué.
 For this example, select "Satin Stitch", and
then set [Width] to "3.0 mm" and [Density]
to "5.0 line/mm".
cc For details on setting [Stroke], [Interval]
and [Pitch], refer to"E/V Stitch" on
page 328
7
Under [Output Pattern], select whether
covering stitches will be added around the
entire pattern ([Add]) or covering stitches will
be sewn for shape lines ([Replace]).
 For this example, select [Replace].
8
Specify hole sewing in [Create an applique
with hole sewing].
Select this check box when creating an
appliqué with holes (empty regions).
 For this example, select this check box.
Satin Stitch
Settings can be
specified for [Width]
and [Density].
E Stitch
Settings can be
specified for
[Stroke], [Interval]
and [Pitch].
V Stitch
Settings can be
specified for
[Stroke], [Interval]
and [Pitch].
Add
Settings can be
specified for
[Distance from
original Pattern].
Replace
b
This check box appears when only the outer
pattern with hole sewing applied or only a text
pattern (with fonts other than built-in fonts 025 and
029, a user-defined font or a Small Text font) is
selected, or when [Replace] is selected under
[Output Pattern].
* Multiple text patterns can be selected if certain
conditions are met.