Baby Lock Palette 10 (ECS10) Instruction Manual - Manual (Page 334)

333
Sewing Attributes
Fill Stitch
Programmable Fill Stitch (Prog. Fill Stitch)
Under
sewing
cc "Satin Stitch" on page 331
Density
Direction
Stitch Type
Specify the shape of the returning ends of the stitching.
This cannot be specified if the sewing direction is set to
[Auto].
Half Stitch
cc "Half Stitch" on page 331 and "Running Stitch Path" on page 332 Running
Stitch Path
Step pitch Specify the length of one stitch.
Short Long
Frequency
0% 50%
Pull com-
pensation
cc "Pull compensation" on page 332
Connection
Points
This sewing attribute is available only when a text pattern is selected.
cc
"Selecting connection point positions in a text pattern" on page 116
Feathered
Edge
cc "Feathered edge" on page 332
Under sewing
cc "Region sewing attributes" on page 331 and 332
Density
Direction
Half Stitch
Running Stitch Path
Pull compensation
Connection Points
This sewing attribute is available only when a text pattern is selected.
cc
"Selecting connection point positions in a text pattern" on page 116
Feathered Edge
cc "Feathered edge" on page 332
b
cc
"Satin Stitch" in the "Region sewing attributes" on page 331