Baby Lock Palette 10 (ECS10) Instruction Manual - Manual (Page 152)

151
Importing Image Data
1
Click the [Image] tab.
2
Click [Open] in the [Image] group, and then
click [From Clipboard].
 The image on the clipboard is imported into
the Design Page.
1
Check that the scanner or other TWAIN
device is correctly connected to your
computer.
2
Click the [Image] tab.
3
Click [Open] in the [Image] group, and then
click [Select TWAIN device].
4
From the [Sources] list, click the desired
device to select it. Click [Select].
5
Click the [Image] tab.
6
Click [Open] in the [Image] group, and then
click [From TWAIN Device].
 The driver interface for the device selected
in the Select Source dialog box appears.
7
Specify the necessary settings for importing
an image, and then import the image.
 The imported image will be pasted into the
Design Page at its original size.
Importing image from the
clipboard
a
This can only be done when there is image data on
the Clipboard.
Importing image from a
scanner (TWAIN Device)
b
TWAIN is an application interface (API)
standardization for software that controls scanners
and other devices.
a
If no TWAIN device is installed, there will be no
names displayed in the [Sources] list. First, install
the driver software for the TWAIN device.
a
For information on using the driver interface, refer
to the help manual for that interface, or contact the
manufacturer of the interface.