Hypertherm THC ArcGlide - Manual (Page 105)

ArcGlide THC Instruction Manual 806450 105
2 – Installation
CNC I/O cable
 See CNC discrete I/O on page 108 for more information about discrete CNC I/O signals.
Part number Length Part number Length
223213 3.0 m (10 feet) 223107 23.0 m (75 feet)
223214 6.0 m (20 feet) 223108 30.5 m (100 feet)
223122 7.5 m (25 feet) 223109 45.5 m (150 feet)
223215 10.5 m (35 feet) 223110 61.0 m (200 feet)
223005 15.0 m (50 feet)
Connect this end to
the CNC by adding the
appropriate connector
for your CNC.
Yellow band
Diameter = 13.72 mm (0.54 inch)
Bend radius = 152.40 mm (6 inch)
Connect this end to the port on the
control module with the yellow ring.