Hypertherm THC ArcGlide - Manual (Page 84)

84 ArcGlide THC Instruction Manual 806450
2 – Installation
Install the control module
Install the control module where it will be easy to read the display and to reach the controls during installation and
troubleshooting. A dry, dust-free wiring cabinet is ideal. Leave a clearance space of 200 mm (8 inches) from the front of
the control module and 6.00 mm (0.25 inch) from the heatsink.
Figure 17
358.65 mm
(14.12 inch)
25.40 mm
(1.00 inch)
166.62 mm
(6.56 inch)
157.23 mm
(6.19 inch)
107.95 mm
(4.25 inch)
Front view
Right side view
Rear view
377.70 mm
(14.87 inch)
71.63 mm
(2.82 inch)
127.00 mm
(5.00 inch)
165.00 mm
(6.50 inch)
5.10 mm (0.20 inch) wide
6.35 mm (0.25 inch) bolt
168.91 mm
(6.65 inch)
381.00 mm
(15.37 inch)
371.35 mm
(14.62 inch)