Hypertherm THC ArcGlide - Manual (Page 76)

76 ArcGlide THC Instruction Manual 806450
2 – Installation
14 – ArcGlide THC with discrete connection to a Picopath interface CNC and MAXPRO200 plasma system
25
26
Optional ArcGlide HMI
Lifter I/O cable
ArcGlide control module
Rotary address switch, set to 1
Rotary address switch, set to 1
Plasma I/O cable
Shielded Ethernet cable, up to
61 m (200 feet) long
CNC I/O cable
ArcGlide lifter
Arc voltage sense wires to plasma system. Use
~0.9 mm 2 (18 AWG) twisted pair wire, rated
600 V or greater.
Yellow/black 26- wire Terminal strip
Discrete plasma interface
module
(228572) or (228576)
Yellow 25+ wire
MAXPRO200
CNC with Picopath
interface
Machine interface cable (223327)
I/O
Axes 1, 2
Axes 3, 4