Hypertherm THC ArcGlide - Manual (Page 53)

ArcGlide THC Instruction Manual 806450 53
Section 2
Installation
Hardware setup
After you receive your new equipment:
 Make sure that all items on your order have been received in good condition. Contact your table manufacturer if any
parts are damaged or missing.
 Inspect the system components for damage that may have occurred during shipping. See Claims if there is evidence
of damage. All communications regarding this equipment must include the model number and the serial number
located on the back of the unit.
 Before you set up and operate this Hypertherm system, read Safety on page 13 for important safety information.
Claims
 Claims for damage during shipment – If your unit was damaged during shipment, you must file a claim with the
carrier. Hypertherm will furnish you with a copy of the bill of lading upon request. If you need additional assistance,
call the nearest Hypertherm office listed in the front of this manual.
 Claims for defective or missing merchandise – If any of the components are missing or defective, contact your
table manufacturer. If you need additional assistance, call the nearest Hypertherm office listed in the front of this
manual.