Freescale Semiconductor MCF5480 - Manual (Page 290)

MCF548x Reference Manual, Rev. 3
8-40 Freescale Semiconductor
NOTE
DUMP does not check for a valid address; it is a valid command only when
preceded by
NOP
,
READ
, or another
DUMP
command. Otherwise, an illegal
command response is returned. NOP can be used for intercommand padding
without corrupting the address pointer.
The size field is examined each time a DUMP command is processed, allowing the operand size to be
dynamically altered.
Command/Result Formats:
Command Sequence:
Figure 8-32. DUMP Command Sequence
Operand Data: None
15 12 11 8 7 4 3 0
Byte Command 0x1 0xD 0x0 0x0
Result X X X X X X X X D[7:0]
Word Command 0x1 0xD 0x4 0x0
Result D[15:0]
Longword Command 0x1 0xD 0x8 0x0
Result D[31:16]
D[15:0]
Figure 8-31. DUMP Command/Result Formats
XXX
’NOT READY’
DUMP (B/W)
???
XXX
’ILLEGAL’
NEXT CMD
’NOT READY’
NEXT CMD
’NOT READY’
READ
MEMORY
LOCATION
XXX
BERR
NEXT CMD
RESULT
XXX
’NOT READY’
DUMP (LONG)
???
XXX
’ILLEGAL’
NEXT CMD
’NOT READY’
NEXT CMD
’NOT READY’
READ
MEMORY
LOCATION
XXX
BERR
NEXT CMD
MS RESULT
NEXT CMD
LS RESULT