Freescale Semiconductor MCF5480 - Manual (Page 307)

Debug C Definition of PSTDDATA Outputs
MCF548x Reference Manual, Rev. 3
Freescale Semiconductor 8-57
ori.l #<data>,Dx PSTDDATA = 0x1
pea.l <ea>y PSTDDATA = 0x1,{0xB, destination operand}
pulse PSTDDATA = 0x4
rems.l <ea>y,Dw:Dx PSTDDATA = 0x1,{0xB, source operand}
remu.l <ea>y,Dw:Dx PSTDDATA = 0x1,{0xB, source operand}
rts PSTDDATA = 0x1, PSTDDATA = 0x5, {[0x9AB], target address}
sats.l Dx PSTDDATA = 0x1
scc.b Dx PSTDDATA = 0x1
sub.l <ea>y,Dx PSTDDATA = 0x1,{0xB, source operand}
sub.l Dy,<ea>x PSTDDATA = 0x1,{0xB, source},{0xB, destination}
suba.l <ea>y,Ax PSTDDATA = 0x1,{0xB, source operand}
subi.l #<data>,Dx PSTDDATA = 0x1
subq.l #<data>,<ea>x PSTDDATA = 0x1,{0xB, source},{0xB, destination}
subx.l Dy,Dx PSTDDATA = 0x1
swap.w Dx PSTDDATA = 0x1
tas.b <ea>x PSTDDATA = 0x1, {0x8, source}, {0x8, destination}
tpf PST = 0x1
tpf.l #<data> PST = 0x1
tpf.w #<data> PST = 0x1
trap #<data> PSTDDATA = 0x1 1
tst.b <ea>x PSTDDATA = 0x1,{0x8, source operand}
tst.l <ea>y PSTDDATA = 0x1,{0xB, source operand}
tst.w <ea>y PSTDDATA = 0x1,{0x9, source operand}
unlk Ax PSTDDATA = 0x1,{0xB, destination operand}
wddata.b <ea>y PSTDDATA = 0x4, {0x8, source operand
wddata.l <ea>y PSTDDATA = 0x4, {0xB, source operand
wddata.w <ea>y PSTDDATA = 0x4, {0x9, source operand
Table 8-30. PSTDDATA Specification for User-Mode Instructions (Continued)
Instruction Operand Syntax PSTDDATA