INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Codeposition Software Operating Manual - Manual (Page 25)

2 - 5
IP
N 07
4-
58
5-
P1
A
IQS-233 Operating Manual
Figure 2-5 Windows Installer window
4a Click OK to keep the previously installed DLL, or
4b To remove the previously installed DLL and install a different DLL:
4b1 Click OK to close the Windows Installer window.
4b2 Click Control Panel >> Programs to display a list of installed
programs.
4b3 Select the IQM233 DLL or the SQM242 with IQM DLL from the list.
4b4 Click Uninstall to remove the selected DLL.
4b5 Install the DLL again. Refer to section 2.2.1 on page 2-2 .