INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Codeposition Software Operating Manual - Manual (Page 84)

2 - 64
IP
N 07
4-
58
5-
P1
A
IQS-233 Operating Manual
Exit. . . . . . . . . . . . . . . . . . . . Supervisor, Technician, User
Permits assigned access level and above to have
access to the Exit option from the File menu.
Edit Menu pane
Process . . . . . . . . . . . . . . . Supervisor, Technician, User
Permits assigned access level and above to have
access to the Process option from the Edit menu.
Film . . . . . . . . . . . . . . . . . . . Supervisor, Technician, User
Permits assigned access level and above to have
access to the Film option from the Edit menu.
Material . . . . . . . . . . . . . . . . Supervisor, Technician, User
Permits assigned access level and above to have
access to the Material option from the Edit menu.
System . . . . . . . . . . . . . . . . Supervisor, Technician, User
Permits assigned access level and above to have
access to the System option from the Edit menu.
Main Form Settings
Use the drop down menu to select level of access: Supervisor, Technician, User.
This controls access to the parameters along the right side of the
IQS-233 Codeposition window. See
Figure 2-51 on page 2-67 . These settings can
be viewed by any user, but values can only be edited by the assigned access level
or higher access.
Security . . . . . . . . . . . . . . . Displays level of access of current user.