3 save, 4 save as, Caution – INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Codeposition Software Operating Manual User Manual
Page 32
2 - 12
IP
N 07
4-
58
5-
P1
A
IQS-233 Operating Manual
2.3.3.1.3 Save
Click File >> Save to save the current Process and System parameter values to
the configuration filename displayed in the message pane on the
IQS-233 Codeposition window.
If the default configuration filename, InitConfig.xml, is displayed, the default
parameters loaded when IQS-233 Codeposition software is started will be
overwritten by any changes made to the Process and System parameters.
2.3.3.1.4 Save As
Click File >> Save As to save the current Process and System configuration under
a different name. Configuration files are saved in .xml format. The default folder for
saving a configuration file is C:\ProgramData\INFICON\IQS-233 Codeposition;
however, the configuration file may be saved to another folder location if desired
(see
).
CAUTION
Do not delete or alter the InitConfig.xml, Materials.xml,
Setup.xml, and Users.xml files located in the
C:\ProgramData\INFICON\IQS-233 Codeposition folder.
Do not move these files to another folder.