INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Codeposition Software Operating Manual - Manual (Page 30)

2 - 10
IP
N 07
4-
58
5-
P1
A
IQS-233 Operating Manual
2.3.3.1.1 Process
Click File >> Process to display a list of saved process configurations (see Figure
2-9 ). A check mark next to the current process name indicates that the process
configuration has been loaded for that process name.
NOTE: The current process name is also displayed in the IQS-233 Codeposition
window (refer to Figure 2-7 on page 2-8 ).
The process configuration consists of all of the parameters in the Process window
(see
Figure 2-16 on page 2-18 ). System and security parameters are not included
in the process configuration. System parameters are contained in the .xml
configuration file. A different set of system parameters can be selected by loading
a previously saved configuration file (see
section 2.3.3.1.2 ).
Figure 2-9 Process list