INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Codeposition Software Operating Manual - Manual (Page 80)

2 - 60
IP
N 07
4-
58
5-
P1
A
IQS-233 Operating Manual
2.3.3.6.7 Display Tab
The IQS-233 Codeposition software display properties are configured in the
Display tab. See
Figure 2-43 .
Figure 2-43 System Setup window - Display tab
Display pane
Filter Readings . . . . . . . . . . 1 to 10
Select the number of desired readings between
display updates. A value of 1 updates the display as
fast as possible, while a higher value provides
greater filtering of graphed data between display
updates. Filter Readings only filters readings for
Power and Thickness on the display.
NOTE: The IQM-233 card resolution for PID control
is unchanged.
Last Output Displayed . . . . 1 to 6 (IQM-233 card)
1 to 4 (SQM-242 card)
Select the maximum number of displayed Output
readouts.