INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Codeposition Software Operating Manual - Manual (Page 85)

2 - 65
IP
N 07
4-
58
5-
P1
A
IQS-233 Operating Manual
2.3.3.7.3 Supervisor Tab
Figure 2-48 Security User Setup window - Supervisor tab
The Supervisor tab allows Supervisors to add, edit, and delete users.
Add User . . . . . . . . . . . . . . Click Add User to display the Add User window as
seen in Figure 2-49 . This window allows for new
users to be added, access for that user to be
assigned, and a user password to be created and
confirmed. Click OK to save user.
Figure 2-49 Add User window
Edit User . . . . . . . . . . . . . . . Select the user from the Supervisor tab (refer to
Figure 2-48 ) and click Edit User to reassign an
access level to that user. Click OK to save changes.
Delete User . . . . . . . . . . . . . Select the user from the Supervisor tab (refer to
Figure 2-48 ) and click Delete User to remove that
user from having access to IQS-233 Codeposition
software.