Lenze EVS93xx CrossCutter - Manual (Page 104)

Cross Cutter
Features of the "Cross Cutter" prepared solution
 Prepared Solution Servo PLC / ECSxA 1.1 EN 2-90
Possible settings: Code
Default Selection
Comment
C3639/
000
0.0 -200.0... {1%} ... 200.0
Setvalue of the external torque precontrol
function external torque precontrol
0
OUT = IN1
1 OUT = IN1 + IN2
2 OUT =IN1 - IN2
3 OUT =IN1 * IN2
4 OUT =IN1 / IN2
5 OUT =IN1/(100-IN2)
C3640/
000 1 0 {1} 5
IN1= g_nFactorInertia_a (C3667/000)
IN2= g_nTorquePreAdd_a (C3639/000)
Enable torque precontrol.
TRUE Torque precontrol is enabled.
C3666/
000
0 0 {1} 1
FALSE Torque precontrol is disabled.
C3667/
000
10.0 -200.0... {1%} ... 200.0
Adaptation factor for torque precontrol