Lenze EVS93xx CrossCutter - Manual (Page 148)

Cross Cutter
Installing and starting up the "CrossCutter" prepared solution
 Prepared Solution Servo PLC / ECSxA 1.1 EN 3-134
Now proceed as follows to save the parameter set:
Click code C0003 to save the parameter set:
C0003/000 Save parameter set
The input dialog for code C0003 will appear.
The parameter settings have now been saved to non-volatile memory on the controller.
This completes the basic settings for the drive functions.
End
Step 12
Select option 1 "Save PS 1".
Confirm with Ok.
Step 12