Lenze EVS93xx CrossCutter - Manual (Page 183)

Cross Cutter
Appendix
 Prepared Solution Servo PLC / ECSxA 1.1 EN 6-15
6.1.4 VarCrossCutterPieceCounter
Inputs
Global variables (Variable type: VAR_GLOBAL)
Name Data type Value/Meaning
Reset cutting counter for cutting operation.
TRUE Reset counter.
g_bResetCuttingProfileCounter
BOOL
FALSE Counter will not be reset.
Reset cutting counter for reject operation.
TRUE Reset counter.
g_bResetRejectProfileCounter
BOOL
FALSE Counter will not be reset.
Reset cutting counter for test operation.
TRUE Reset counter.
g_bResetTestProfileCounter
BOOL
FALSE Counter will not be reset.
g_wSetValuePiecesOfCuttingProfile WORD Setpoint cutting quantity for cutting operation
g_wSetValuePiecesOfTestProfile
WORD
Setpoint cutting quantity for reject operation
g_wSetValuePiecesOfRejectProfile
WORD
Setpoint cutting quantity for test operation
Outputs
Global variables (Variable type: VAR_GLOBAL)
Name Data type Value/Meaning
Status signal: The set cutting quantity has been reached for cutting operation.
TRUE Set cutting quantity reached.
g_bSetValueOfCuttingPiesesCutting
ProfileReached
BOOL
FALSE Set cutting quantity not reached.
Status signal: The set cutting quantity has been reached for reject operation.
TRUE
Set cutting quantity reached.
g_bSetValueOfCuttingPiesesReject
ProfileReached
BOOL
FALSE
Set cutting quantity not reached.
Status signal: The set cutting quantity has been reached for test operation.
TRUE
Set cutting quantity reached.
g_bSetValueOfCuttingPiesesTest
ProfileReached
BOOL
FALSE
Set cutting quantity not reached.
g_wCounterValueCuttingProfile WORD Cutting counter for cutting operation
The counter is limited to a maximum value of 65535; on reaching this value it will
overflow to 0.
g_wCounterValueRejectProfile
WORD
Cutting counter for reject operation
The counter is limited to a maximum value of 65535; on reaching this value it will
overflow to 0.
g_wCounterValueTestProfile
WORD
Cutting counter for test operation
The counter is limited to a maximum value of 65535; on reaching this value it will
overflow to 0.