Lenze EVS93xx CrossCutter - Manual (Page 128)

Cross Cutter
Installing and starting up the "CrossCutter" prepared solution
 Prepared Solution Servo PLC / ECSxA 1.1 EN 3-114
Proceed as follows to generate a basic motion profile:
Click <Edit> <Project Settings …> to modify the project settings for the next motion profile:
Step 8
Step 7
1. Select the input mode.
2. Select a line as the
motion characteristic.
3. Draw a line from (x
0
,y
0
)
to (x
max
,y
max
).
4. Switch to
interpolation mode.
5. Click Go to
generate the table of
values.
6. Click LCx to write the
table of values to the LC9
file.