2 structure and functional principle, 1 typical structure of a cross-cutter application, Structure and functional principle -2 – Lenze EVS93xx CrossCutter User Manual
Page 16: Typical structure of a cross-cutter application -2, Cross cutter
Cross Cutter
Features of the "Cross Cutter" prepared solution
Prepared Solution Servo PLC / ECSxA 1.1 EN
2-2
2.2
Structure and functional principle
2.2.1
Typical structure of a cross-cutter application
Figure 1: Typical structure of a cross-cutter application
The prepared solution is able to support applications in which continuous material is cut to
length in defined cutting lengths. A fundamental distinction is drawn between asynchronous and
synchronous cross cutters. In the prepared solution, the asynchronous cross cutter can be used
for cutting lengths shorter than or equivalent to the cutting circle circumference. The
synchronous cross cutter can be used for all cutting lengths shorter than or longer than the
cutting circle circumference.
Continuous
Mark sensor
Feed roll
Master value rotary
Drive cross
cutter
Knife drum