Lenze EVS93xx CrossCutter - Manual (Page 24)

Cross Cutter
Features of the "Cross Cutter" prepared solution
 Prepared Solution Servo PLC / ECSxA 1.1 EN 2-10
2.3 Functional application criteria for the parameterisable variant
In order to enable you to check the compatibility of the prepared solution for your application
and estimate its usefulness, a list of decision-making criteria and limiting conditions to which the
use of the prepared solution is subject appears below.
How do you intend to process the material?
Continuous cutting: You intend to cut panels of material to the same length continuously;
the cutting length can be varied at will and the new cutting length applied once the
calculation is complete. This operation is supported by the prepared solution.
Intermittent operation: You intend to cut panels of material to different lengths continuously.
This operation is not supported by the prepared solution.
?
NO
YES
Your application scenario
cannot be solved using the
prepared solution at this
time as the solution does
not support intermittent
operation.