Lenze EVS93xx CrossCutter - Manual (Page 98)

Cross Cutter
Features of the "Cross Cutter" prepared solution
 Prepared Solution Servo PLC / ECSxA 1.1 EN 2-84
Possible settings: Code
Default Selection
Comment
C3668/
000
370.0000 0.0000... {0.0001
m_units}
... 214000.0000 Distance measured from TP sensor to 6 o'clock position on the
knife drum.
C3690/
000
- - - -
Number of knives mounted on the knife drum.
Up to 6 knives can be mounted on the cross-cutter drum.
Application status word bit 28: Use of the print-mark register.
TRUE
Use the print-mark register.
C4150/
000
Bit 28
- - - -
FALSE Do not use the print-mark register.