Lenze EVS93xx CrossCutter - Manual (Page 132)

Cross Cutter
Installing and starting up the "CrossCutter" prepared solution
 Prepared Solution Servo PLC / ECSxA 1.1 EN 3-118
Connect your PC/laptop to the servo axis system bus via the EMF2177IB/EMF2173IB PC system bus adapter
(you may be using more than one axis in the drive system):
TIP!
To facilitate connection, the EMF2177IB/EMF2173IB PC system bus adapter is supplied with a
three-pin system bus connector supporting easy connection of the PC system bus adapter to the
system bus.
Reconnect the servo controller to the control voltage.
Step 4
Step 3
PC/laptop PC system bus adapter
System
bus Servo
controller