1 wiring the control terminals, Wiring the control terminals -99, Cross cutter – Lenze EVS93xx CrossCutter User Manual
Page 113
Advertising
Cross Cutter
Installing and starting up the "CrossCutter" prepared solution
Prepared Solution Servo PLC / ECSxA 1.1 EN
3-99
3.3.1
Wiring the control terminals
Figure 40: Control terminal wiring plan for 9300 Servo PLC
Figure 41: Control terminal wiring plan for ECS
Caution!
Digital input DIGIN_bIn1_b using 9300 Servo PLC or DIGIN_bIn4_b using ECS is inverted via the code
initialisation values (see Chapter 6.2.2) in order to achieve wire-break protection (0 V = QSP).
Caution!
The connection plan above shows the wiring that is fundamentally required specifically in order
for the prepared solution to function correctly.
Advertising