Cross cutter, Appendix – Lenze EVS93xx CrossCutter User Manual
Page 266
Advertising
Cross Cutter
Appendix
Prepared Solution Servo PLC / ECSxA 1.1 EN
6-98
Outputs
(Variable type: VAR_OUTPUT)
Name Data
type
Value/Meaning
dnOffsetForShiftedTP
DINT
Calculated position value by which the first print-mark signal must be delayed in
order for the first cut to be made at a print mark. The value is scaled in
0.0001[m_units].
nNumberOfMissedOutTpMarks INT
Number
of print marks which pass the cross-cutter knife drum before the first cut is
made.
Figure49: Example wiring of the CalcOffsetForShiftedTP FB in the prepared solution
Advertising