4 online start-up with gdc, Online start-up with gdc -123, Cross cutter – Lenze EVS93xx CrossCutter User Manual
Page 137
Advertising
![background image](/manuals/566149/137/background.png)
Cross Cutter
Installing and starting up the "CrossCutter" prepared solution
Prepared Solution Servo PLC / ECSxA 1.1 EN
3-123
3.4.4
Online start-up with GDC
Start GDC and run a search for the controllers connected to the system bus. GDC will find
the connected controllers. These will include the controller loaded with the
CrossCutter_SPLC_Vxxxxxx for 9300 Servo PLC and CrossCutter_ECS_Vxxxxxx for ECS.
Prepared Solution for 9300 Servo PLC
Prepared Solution for ECS
Double-click the cross-cutter axis drive and read back the parameters from the drive.
Start
Step 1
Advertising