Rockwell Automation 294D ArmorStart LT Distributed Motor Controller DeviceNet Version - User Manual - Manual (Page 130)

130 Rockwell Automation Publication 290D-UM001A-EN-P - June 2012
Chapter 4 Bulletin 290D/291D/294D Programmable Parameters
TripLog3
This parameter provides the fourth last trip
to occur.
Parameter Number 21
Access Rule GET
Data Type UINT
Group Trip Status
Units —
Minimum Value 0
Maximum Value 75
Default Value 0
TripLog4
This parameter provides the fifth last trip
to occur.
Parameter Number 22
Access Rule GET
Data Type UINT
Group Trip Status
Units —
Minimum Value 0
Maximum Value 75
Default Value 0
SnapShotOutFreq
This parameter provides a snapshot
of output frequency at time of last trip.
Parameter Number 23
Access Rule GET
Data Type UINT
Group Trip Status
Units x.x Hz
Minimum Value 0
Maximum Value 999.9
Default Value 0
SnapShotOutAmps
This parameter provides a snapshot
of output current at time of last trip.
Parameter Number 24
Access Rule GET
Data Type UINT
Group Trip Status
Units x.xx Amps
Minimum Value 0
Maximum Value 4.60
Default Value 0