Rockwell Automation 294D ArmorStart LT Distributed Motor Controller DeviceNet Version - User Manual User Manual
Page 70
70
Rockwell Automation Publication 290E-UM001B-EN-P - June 2012
Chapter 3
Product Commissioning
1.
Go on-line using RSNetWorx for DeviceNet. This can be accomplished by
selecting the Network menu, and then choosing RSWho.
2.
Choose the appropriate DeviceNet PC interface.
Note:
DeviceNet drivers must be configured using RSLinx prior to being
available to RSNetWorx.
3.
Click OK.
4.
RSNetWorx will notify the user to upload or download devices before
viewing configuration. Click OK
.
5.
RSNetWorx will now browse the network and display all of the nodes it
has detected on the network. For some versions of RSNetWorx software
the ArmorStart EDS files and icon may not be included and will show up
as an “Unregistered Device”. Refer to Registering an EDS file for details.