Rockwell Automation 294D ArmorStart LT Distributed Motor Controller DeviceNet Version - User Manual - Manual (Page 155)

Rockwell Automation Publication 290D-UM001A-EN-P - June 2012 155
Bulletin 290D/291D/294D Programmable Parameters Chapter 4
Zone1ProducedMacId
The MacId address of the device in Zone 1
Parameter Number 106
Access Rule SET
Data Type USINT
Group ZIP
Units –
Minimum Value 0
Maximum Value 64
Default Value 64
Zone2ProducedMacId
The MacId address of the device in Zone 2
Parameter Number 107
Access Rule SET
Data Type USINT
Group ZIP
Units –
Minimum Value 0
Maximum Value 64
Default Value 64
Zone3ProducedMacId
The MacId address of the device in Zone 3
Parameter Number 108
Access Rule SET
Data Type USINT
Group ZIP
Units –
Minimum Value 0
Maximum Value 64
Default Value 64
Zone4ProducedMacId
The MacId address of the device in Zone 4
Parameter Number 109
Access Rule SET
Data Type USINT
Group ZIP
Units –
Minimum Value 0
Maximum Value 64
Default Value 64