Rockwell Automation 294D ArmorStart LT Distributed Motor Controller DeviceNet Version - User Manual - Manual (Page 154)

154 Rockwell Automation Publication 290D-UM001A-EN-P - June 2012
Chapter 4 Bulletin 290D/291D/294D Programmable Parameters
ProducedIOAssy
Selects the format of the I/O data
consumed
294 default = 155
Parameter Number 102
Access Rule SET
Data Type USINT
Group Network
Units –
Minimum Value 52
Maximum Value 190
Default Value 155
AutoRunZip
Enables this device to produce COS
messages on powerup
0=Disable
1=Enable
Parameter Number 103
Access Rule SET
Data Type BOOL
Group ZIP
Units –
Minimum Value 0
Maximum Value 1
Default Value 0
ZoneProducedEPR
Expected Packet Rate for producing Zip
COS connection
Parameter Number 104
Access Rule SET
Data Type UINT
Group ZIP
Units msec
Minimum Value 1
Maximum Value 65535
Default Value 75
ZoneProducedPIT
Production Inhibit Time for the producing
Zip connection
Parameter Number 105
Access Rule SET
Data Type UINT
Group ZIP
Units msec
Minimum Value 1
Maximum Value 65535
Default Value 75