Rockwell Automation 294D ArmorStart LT Distributed Motor Controller DeviceNet Version - User Manual - Manual (Page 164)

164 Rockwell Automation Publication 290D-UM001A-EN-P - June 2012
Chapter 4 Bulletin 290D/291D/294D Programmable Parameters
Zone1Key
Device Value Key for the device in Zone 1
Parameter Number 138
Access Rule SET
Data Type UINT
Group ZIP
Units –
Minimum Value 0
Maximum Value 65535
Default Value 0
Zone2Key
Device Value Key for the device in Zone 2
Parameter Number 139
Access Rule SET
Data Type UINT
Group ZIP
Units –
Minimum Value 0
Maximum Value 65535
Default Value 0
Zone3Key
Device Value Key for the device in Zone 3
Parameter Number 140
Access Rule SET
Data Type UINT
Group ZIP
Units –
Minimum Value 0
Maximum Value 65535
Default Value 0
Zone4Key
Device Value Key for the device in Zone 4
Parameter Number 141
Access Rule SET
Data Type UINT
Group ZIP
Units –
Minimum Value 0
Maximum Value 65535
Default Value 0