Rockwell Automation 294D ArmorStart LT Distributed Motor Controller DeviceNet Version - User Manual - Manual (Page 95)

Rockwell Automation Publication 290D-UM001A-EN-P - June 2012 95
Bulletin 290D/291D/294D Programmable Parameters Chapter 4
TripLog1
This parameter provides the last trip to
occur.
Parameter Number 18
Access Rule GET
Data Type UINT
Group Trip Status
Units —
Minimum Value 0
Maximum Value 75
Default Value 0
TripLog2
This parameter provides the second last
trip to occur.
Parameter Number 19
Access Rule GET
Data Type UINT
Group Trip Status
Units —
Minimum Value 0
Maximum Value 75
Default Value 0
TripLog3
This parameter provides the third last trip
to occur.
Parameter Number 20
Access Rule GET
Data Type UINT
Group Trip Status
Units —
Minimum Value 0
Maximum Value 75
Default Value 0
TripLog4
This parameter provides the fourth last trip
to occur.
Parameter Number 21
Access Rule GET
Data Type UINT
Group Trip Status
Units —
Minimum Value 0
Maximum Value 75
Default Value 0