Rockwell Automation 294D ArmorStart LT Distributed Motor Controller DeviceNet Version - User Manual User Manual

Page 239

Advertising
background image

Rockwell Automation Publication 290D-UM001A-EN-P - June 2012

239

CIP Information

Appendix B

8

Set

NV

ZIP Auto Run

BOOL

Configure the ZIP producing
connection to auto-allocate on
power-up

0=disable
1=enable

9

Get*

NV

Associated Connection

Instance

UINT

The instance number of the
connection object associated
with this ZIP instance.

*For systems that dynamically allocate
connections, the access rule can be Set.

10

Set

NV

Connection Path Length

UINT

Number of bytes of the
“Connection Path” attribute.

11

Set (prod)
Get (cons)

NV

Connection Path

EPATH

Specifies an application object
whose data is to be produced,
or is to receive consumed data.

Consumed path:
21 0e 03 25 01 00 30 02
Produced path:
Produced assy path

12

Set (cons)

Get (prod)

NV

Data Size

UINT

The size of the data to be
produced or consumed.

Consumed: 32 or 8
Procuced: size of produced assembly

13

Get*

NV

Connection Direction

BOOL

The direction of data flow for
the connection instance
represented by this instance.

0=Producing
1=Consuming
*For systems that dynamically allocate
connections, the access rule can be Set.

14

Set*

NV

Data Security Disable

BOOL

Enables data security
checking for the connection.
*Get access for producers.
Producers return the value 0

0=enable
1=disable
(Default = 0)

15

Set*

NV

Zone Analog Data Type

UINT

Data type from CIP Common
Spec Table C-6.1
“Identification Codes of
Elementary Data Types”.

0xC7 = UINT

16

Set*

(Get for

producers)

NV

Zone Analog Mask

STRUCT of:

USINT
Array of
BYTE

Masks individual data units of
the type defined in the “Zone
Analog Data Type” in a
consumed message for use
by in Zone Analog Data table.
Each bit in a BYTE mask
represents one unit (WORD,
REAL, etc.) of consumed data

Struct of
USINT = 2
Array[2] of BYTE
Producers return USINT= 0

17

Set*

(Get for

producers)

NV

Zone Analog Offset

UINT

Specifies an offset into the 8-
byte Zone Point Data table to
place masked data.

*Get access for producers.
Producers return UINT = 0

101

Set*

NV

Zone MAC ID

USINT

Reflects attribute 1 for
ArmorStart LT

103

Set*

NV

Point Mask

DWORD

Reflects attribute 3 for
ArmorStart LT

This attribute matches the Array[4] structure
element in attribute 3

114

Set*

NV

ZoneControl

BYTE

Choose consumed IO
connection properties

Semantics of this bit enumerated value are the
same as params 134-137

116

Set*

NV

Analog Mask

WORD

Reflects attribute 16 for
ArmorStart LT

This attribute matches the Array[2] structure
element in attribute 16

Attribute ID

Access Rule

NV

Name

Data Type

Description of Attribute

Semantics of Values

Advertising