Rockwell Automation 294D ArmorStart LT Distributed Motor Controller DeviceNet Version - User Manual - Manual (Page 41)

Rockwell Automation Publication 290D-UM001A-EN-P - June 2012 41
Installation and Wiring Chapter 2
Dimensions Dimensions are shown in millimeters (inches). Dimensions are not intended
to be used for manufacturing purposes. All dimensions are subject to change.
Figure 11 - Dimensions for Bulletin 290D/291D
Front View Right Side View
Conduit Gland Entrance
ArmorConnect Internal Power
Supply Gland Plate (optional)
ArmorConnect Media
Gland Entrance (optional)
ArmorConnect Source Brake
Gland Plate (optional)
Line Control
Motor
Line
Motor Control
Line
Motor
Source Brake
260
[10.2]
170
[6.7]
217,83
[8.6]
130
[5.1]
65
[2.6]
202,05
[8.0]
38,49
[1.5]
57,13
[2.3]
37
[1.5]
24,25
[1.0]
48,5
[1.9]
0.75" CONDUIT OPENING
1" CONDUIT OPENING
IMPORTANT For proper heat dissipation and product operation, mount the ArmorStart LT in the
vertical orientation as shown.