Dell POWEREDGE M1000E - Manual (Page 108)

106 Configuring System Information
System Health
Use the Health page to view physical device information, including information about the switch’s
power and ventilation sources.
To display the Health page, click System > General > Health in the tree view.
Figure 6-2. Health
The Health page contains the following fields:
• Unit No. — Displays the unit’s position in the stack.
•
Power Supply Status — Displays the power supply status.
–
— The power supply is operating normally.
– — The power supply is not operating normally.
– Not Present — The power supply is currently not present.
• Average Power—Indicates the average power consumption since the date/time of the last bootup or
calculation reset.
• Fan Status— Indicates the fan status. The PowerConnect 8024/8024FM6348 has three fans.
– — The fan is operating normally.
– — The fan is not operating normally.
– Not Present — A fan is currently not present.
• Temperature — Displays the temperature at which the device is currently running.
Viewing System Health Information Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• System Management Commands