Dell POWEREDGE M1000E - Manual (Page 291)

Configuring Switching Information 289
Defining Port Parameters
1. Open the Port Configuration page.
2. Select a unit and port in the Unit and Port fields.
3. Define the available fields on the screen.
4. Click Apply Changes.
The port parameters are saved to the switch.
Displaying the Port Table
1. Open the Port Configuration page.
2. Click Show All.
The Port Configuration Table displays.
Figure 7-21. Port Configuration Table
3. Use the Unit drop-down menu to view the Port Configuration Table for other units in the stack, if
they exist.
Copying Port Configuration Settings
1. Open the Port Configuration page.
2. Click Show All.
The Port Configuration Table displays.
3. Specify the Unit and Port you are copying from in Copy Parameters From.
4. Click Copy To for each Port to receive these parameters.
5. Click Apply Changes.
The Port Configuration settings are copied, and the device is updated.